Category    All Around
Reviewer: Glen Barroncini
Board Name PSh 10-6 & 10-3 Allrounder Sand epoxy
Manufacturer Paddle Surf Hawaii
Length 10′-6” and 10′-3”
Width 28 3/8 both
Thickness 4 5/8 both
Volume Na
Weight 24 #’s 10-6 and 23 # ‘s 10-3 w/ pads
Intended use Surf and Flatwater paddling
Weight range 150-220 #
Target skill Beg-Advance
Included accessories Fins thruster 2 +1
Options (pad, fins, etc. )
MSRP 1299.00
Reviewer age 44
Reviewer Weight 190
Reviewer Skill Advanced Intermediate
Reviewer impressions

Here are the two PSH sandwich epoxy SUP’s by Blane Chambers. The yellow is the 10’3” and red is the 10′-6”. Both are the All-rounder series. Dimensions, 10′-3″ x 28-3/8″x 4-5/8″ and 10′-6″x 28-3/8″x 4-5/8″ Diamond tails .. The width and thickness are the same but they are two different boards.

The 10’3” is a maneuverable, loose board. The rails are foiled out and thin in the nose and tail areas. The rails are a bit smaller ( thickness) mid point due to the domed deck. Flat bottom from rail to rail . The hard edges thru the length of the board from tail to nose on the bottom give the boards its responsiveness for rail to rail action. The rocker is all on the bottom w/ a flat deck. Both boards have 2+ 1 fin set up. FCS GL’s side bites and a 8” flex fin. I have the fin in the middle of the box . Seems loose and responsive. The board is stable and worked great in the larger TS/ Hurricane surf we had last week. The speeds generated on this board was unbelievable and has elevated the Stand Up performance. Was a bit wobbly the first time but now its an easy board to paddle and is stable.. Go to board for the surf..Weight of board 23#’s

The 10′-6” Red, is 3 inches longer but totally different. It’s a very stable board. The rails are fuller and seem thicker due too less dome on the deck. The bottom edges are a bit softer in the nose area. The nose is not as foiled so there is some thickness on the nose. The board’s nose is a bit sharper than the 10-3′s rounded nose. Again all the board’s rocker is on the bottom w/ a flat deck. A little nose kick ever so slight. Flat bottom side to side. Very stable and more buoyant then the smaller board. It surfs great in our waves. I only had the board in waist high waves but its loose and maneuverable too. Same fins and same 2+1 set up. Have to play w/ the fins to get more action from board. I have paddled this board 7 miles in flat water and was great to paddle, had glide and floated great no side to side tracking and paddled pretty straight . The boards weight is 24#’s . Great board for the long paddles to the offshore bars to surf.. Very stable in the surf and in choppy conditions.. Blane Chambers designed these boards to surf and they do. see website.. http://www.paddlesurfhawaii.com/

I’m 5-10” and 188 lbs.. Both boards are great. I like the 10-3 in the surf and the 10-6 in the surf as well as flat water cruising.. Outstanding boards for me..The boards sandwich epoxy construction are tough, durable and paddle resistant. No visible nicks or chunks from paddle.

Manufacturer comments We live here in Hawaii surfing the waves of our island home. PSH was created after we learned how to stand up paddle surf and discovered how fun it is. We were instantly hooked! Once we went through the learning stages we soon found out we were wanting to create better boards to better our paddling and surfing. We saw the incredible potential of what could be done with specially made high performance boards… Whether its just paddling for fitness or tearing up the surf, its all about having fun with Blane Chambers providing boards to stoke you out! ”All They do is Stand Up”